FPI I2450M Manual page 355

Model 1430 Microtector
Electronic Point Gage combines mod-
ern, solid-state integrated circuit elec-
tronics with a time-proven point gage
manometer to provide fast, accurate
pressure measurements.
SPECIFICATIONS AND FEATURES
• Accurate and repeatable to ± .00025
inches water column
• Pressure range: 0 - 2˝ w.c., positive,
negative, or differential pressures
• Non-toxic and inexpensive gage fluid
consists of distilled water mixed with
a small amount of fluorescein green
color concentrate
• Convenient, portable, lightweight
and self-contained, the unit requires
no external power connections and
is operated by a 1.5 volt penlight cell
• A.C. detector current eliminates
point plating, fouling and erosion
• Micrometers are manufactured in accor-
dance with ASME B89.1.13-2001, and
are traceable to a standard at the National
Institute of Standards and Technology
Tygon ® is a registered trademark of Saint-Gobain Corporation
DWYER INSTRUMENTS, INC.
P.O. BOX 373
MICHIGAN CITY, INDIANA 46361,U.S.A
Model 1430 Microtector
Installation and Operating Instructions
® Portable
*
Electronic Point Gage
®
• Three-point mounting, dual leveling
adjustment, and circular level vial
assure rapid setup
• Durablock precision-machined acrylic
®
plastic gage body
• Sensitive 0 - 50 microamp D.C. meter
acts as a detector and also indicates
battery and probe condition
• Heavy 2˝ thick steel base plate
provides steady mounting
• Top-quality glass epoxy circuit board
and solid-state, integrated circuit
electronics
• Electronic enclosure of tough, molded
styrene acrylonitrile provides maximum
protection to components yet allows
easy access to battery compartment
• Rugged sheet steel cover and carrying
case protects the entire unit when not
in use
• Accessories included are (2) 3-foot
lengths Tygon
thread adapters and 3/4 oz. bottle of
fluorescein green color concentrate
with wetting agent
Maximum pressure: 100 psig with
optional pipe thread connections.
Phone: 219/879-8000
Fax: 219/872-9057
Bulletin D-57
® tubing, (2) 1/8˝ pipe
www.dwyer-inst.com
e-mail: info@dwyer-inst.com