BRP E-TEC EVINRUDE Manual page 334

Hide thumbs Also See for E-TEC EVINRUDE:
Table of Contents

Advertisement

Safety
Marine Products and the Safety of People Who Use Them
After repair on any part of the fuel system, pressure test engine portion of fuel system as shown:
When Storing:
If gasoline tank is stored
indoors, do not put it in a room
having an appliance with a
pilot light or where electrical
appliances or switches (which
may spark) will be used.
When Running:
Make sure silencer and its gaskets are on engine and drain hose is in place.
Air silencer mounting screws are special lock screws. Use only the special screws.
S–334
If tank cap has an air
vent valve, make sure
it is closed.
Squeeze until
bulb feels hard
Check for leaks
under engine cover
Whenever possible, remove
hose from outboard and from
tank.
Carburetor air intake
silencer will catch and
hold fuel which may flood
into engine if carburetor
float sticks.
Store hose around ears
of tank. This way,
gasoline is trapped in
tank and not in the hose,
where it might leak onto
the floor if the hose
deteriorates.

Advertisement

Table of Contents
loading

Table of Contents