BRP E-TEC EVINRUDE Manual page 286

Midsection
Tiller Handle Service – Long Handle
Install the handle end of the throttle cable. Snap
the throttle cable trunnion into the recess in the
handle. Install the retainer clip.
1
2
1. Throttle cable trunnion
2. Retainer
Push the throttle cable pin through the end of the
throttle cable.
1. Pin
286
006683
1
006712
Lubricate end of the pin, guides, rollers, helix
halves, and inner handle guide slot with Moly
Lube.
1
2
3
1. Helix halves
2. Rollers
3. Guides
Place the guides over the roller pin and into the
slots of the inner handle. Place the rollers on the
ends of the roller pin.
1. Roller
Assemble the helix halves on the handle and slide
the grip over the helix.
1. Helix halves
1
2
3
COA2674
1
006670
1
006718