BRP E-TEC EVINRUDE Manual page 304

Trim and Tilt
Trim and Tilt Service
Screw the manual release valve in. Remove the
retaining ring using a small pick or screwdriver.
Discard the retaining ring.
2-Cylinder Models
3-Cylinder Models
304
Slowly remove the manual release valve. There
may be pressure behind the valve—wear safety
glasses.
002528 2-Cylinder Models
004279 3-Cylinder Models
Clean up any spilled hydraulic fluid with shop tow-
els.
ENVIRONMENTAL NOTE
Dispose of spilled hydraulic fluid or contaminated
towels in an environmentally responsible manner,
or according to local regulations.
002529
004285