BRP E-TEC EVINRUDE Manual page 318

Manual Starter
Recoil Starter Disassembly
Remove the nut from the starter pawl retaining
screw.
1
1. Nut
Remove the starter pawl retaining screw, washer,
and starter pawl plate with plate return spring from
the starter assembly.
2
1. Screw and washer
2. Plate
3. Spring
Remove starter housing spring and starter pawl
with spring washer from the starter assembly.
2
1. Spring
2. Starter pawl
3. Spring washer (under starter pawl)
318
007855
3
1
007856
3
1
34855
Use a screwdriver to pry open the pulley lock ring,
and remove ring from the starter.
1
1. Lock ring
Remove the friction plates and friction plate spring
washer.
2
1. Friction plates
2. Friction plate spring washer
Hold the pulley in the starter housing while turning
the starter over, legs down. Hold fingers clear of
the pulley and jar the starter housing against a
bench to dislodge the rewind spring and pulley.
Remove the pulley bushing from the pulley.
COA1368
1
1
34854
007857