BRP E-TEC EVINRUDE Manual page 276

Midsection
Tiller Handle Service – Standard
Install the handle end of the throttle cable. Snap
the throttle cable trunnion into the recess in the
handle. Install the retainer clip.
1. Throttle cable trunnion
2. Retainer clip
Install the throttle control plate on outer handle.
1
1. Throttle control plate
276
1
2
24282
24286
24295
Push the throttle cable pin through the end of the
throttle cable.
1
1. Throttle cable pin
Lubricate end of the pin, guides, rollers, helix
grooves, and inner handle guide slot with Moly
Lube. Place the guides over the roller pin and into
the slots of the inner handle. Place the rollers on
the ends of the roller pin. Assemble the helix
halves on the handle and slide the grip over the
helix.
24294
24293