BRP E-TEC EVINRUDE Manual page 285

Install the throttle control plate on outer handle.
1
1. Throttle friction control
Install trim switch wiring through inner steering
handle.
IMPORTANT:
Trim switch wiring must NOT be
twisted through the throttle twist grip or inner tiller
handle / wire guide.
Insert wire guide into inner steering handle.
1
1. Inner tiller handle
2. Wire guide
3. Trim switch wires
Wire guide should slide easily into place. If any
binding is felt, inspect trim switch wiring for twist-
ing. If wire guide is forced into place, it WILL dam-
age trim switch wiring.
006671
1. Inner tiller handle
2. Wire guide
3. Trim switch wires
Make sure trim switch wiring is NOT twisted
before proceeding.
2
3
1. Inner tiller handle
2. Wire guide
3. Trim switch wires
006726
Tiller Handle Service – Long Handle
1
3
2
1
3
Midsection
3
006684
2
006675
11
285