BRP E-TEC EVINRUDE Manual page 282

Midsection
Tiller Handle Service – Long Handle
Use an appropriate tool to carefully pry up on the
inner handle retaining tab.
1. Inner handle retainer tab
Use a wooden dowel and a soft mallet to remove
the inner handle.
Remove shift cable retainer from shift cable trun-
nion.
1. Shift cable retainer
282
1
006679
006678
1
006721
Remove cotter pin from shift handle pin. Remove
shift cable.
1. Cotter pin
Remove shift handle screw and washer. Remove
shift handle, bushing and washer.
1
1. Shift handle screw
Remove shift handle detent ball, spring and guide.
1. Detent ball, spring and guide
1
006708
006714
1
006715