BRP E-TEC EVINRUDE Manual page 274

Midsection
Tiller Handle Service – Standard
Remove the helix halves, rollers, and guides.
1
2
3
1. Helix halves
2. Rollers
3. Guides
Pull the throttle pin out of the cable.
1
1.
Remove stop switch cover screws and cover/stop
switch assembly.
274
1
2
3
007542
24294
24288
Remove the throttle control plate.
1
1. Throttle control plate
Remove the throttle cable retaining clip. Pry the
cable trunnion out of the steering handle and
remove cable.
2
1. Retaining clip
2. Cable trunnion
IMPORTANT:
DO NOT remove the inner handle
except to replace it.
Use a punch and mallet to drive out the steel pin
holding the inner handle into the steering handle.
24287
1
24286
24285