BRP E-TEC EVINRUDE Manual page 267

Drive the steering friction bushing up and out of
the swivel bracket.
Remove the thrust rod from the stern brackets.
Remove one tilt tube nut, and remove tilt tube
from the stern brackets and swivel bracket.
Remove the port and starboard stop link screws
and nuts from the stern brackets.
1
2
1. Thrust rod
2. Tilt tube nut
3. Stop link screw and nut
Remove the two stern bracket flange screws and
separate the stern brackets from the swivel
bracket.
1
1. Flange screws
COA2974
3
3
COA2991R
1
COA2992
Stern Bracket, 2-Cylinder Manual Tilt
Place the tilt/run lever in the RUN position.
Loosen the bellcrank setscrew.
1. Bellcrank setscrew
Remove the tilt/run lever, port stop link, and bush-
ing from the swivel bracket.
1
2
1. Tilt/run lever
2. Port stop link
3. Bushing
Remove the starboard stop link retaining screw
and nut from the swivel bracket.
1
1. Starboard stop link screw
Midsection
1
COA2976
3
002204
002205
267
11