BRP E-TEC EVINRUDE Manual page 206

Powerhead
Powerhead Disassembly
Remove the lower main bearing only if it needs to
be replaced. Use external retaining ring pliers to
remove the lower bearing retaining ring.
IMPORTANT:
If the lower main bearing is re-
moved from the crankshaft, it must be discarded.
DO NOT reuse it.
Use a bearing separator to support the bearing,
and press off the crankshaft.
206
Remove center main bearings and split sleeves
for inspection. DO not mix parts. Note location of
bearings for reassembly.
002039
002052
24381