Making Copies; Making Copy Settings - Muratec MFX-1500E Operating Instructions Manual

Getting started

Making copies

Your fax machine also doubles as a convenience copier.
To make copies with your fax machine, press
the Copy mode.
When the machine is in the Copy ready mode, the

Making copy settings

Number of pages
Use the numeric keypad to enter the desired number of copies for the document.
Copy reduction or enlargement rate
Your fax machine can make enlarged and reduced copies. For more information, see
"Setting of enlargement or reduction for copying," page 1.31.
Note: The copy enlargement and reduction rate setting affects only copying. It
doesn't affect the fax reception reduction rate (see pages 2.3–2.3).
1.28
/ to change to
COPY FAX
will show:
LCD
Number of copies
Copy reduction and enlargement rate
Recording paper size
Paper source
C1:First paper cassette
C2:Second paper cassette (Option)
C3:Third paper cassette (Option)
T :Muliti paper tray
Contrast level
Paper source and paper size
If you wish to select the paper supply source manually, press
edly until your desired paper source appears:
You may also choose from either the standard paper cassette (C1) or the Multi
paper tray (T). If your machine also has either or both of the two optional cassettes,
you may also choose (C2) or (C3). To use the Multi paper tray, press
display shows:
Then, press ? to set paper size. This is the size of the paper in either the
PAPER SIZE
paper cassette (or cassettes, if you have one or both of the optional cassettes) or
Multi paper tray. You can set letter- or legal-sized paper in the paper cassette(s),
and letter-, legal- or half-letter-sized paper in the Multi paper tray. When you set
transparency film on the multi paper tray, please select "OHP" mode.
Contrast level
See "Contrast" (pages 1.17–1.18) for more information.
? repeat-
PAPER SIZE
while the
ENTER