Making Copies; Making Copy Settings; Number Of Pages; Copy Reduction Or Enlargement Rate - Muratec MFX-1500 Operating Instructions Manual

Making copies

One of the best things about your fax machine is that it doubles as a copy machine.
This makes it easy for you to keep copies of your important documents, such as
insurance forms, receipts and letters. That's right: no more dashes to the copy shop!
COPY FAX
Press / to change to the Copy mode.
COPY FAX
When the machine is in the Copy ready mode, the
Copy Ready Num: 1
C1:LTR 100%

Copy reduction or enlargement rate

Paper size.
Paper source
C1: First paper cassette.
C2: Optional second paper cassette. (If attached)
C3: Optional third paper cassette. (If attached)
T : Multipurpose tray.
Contrast level (See page 1.21–1.22)

Making copy settings

Number of pages

Use the numeric keypad to enter the desired number of copies for the document.
Copy reduction or enlargement rate
Your fax machine can make enlarged and reduced copies. For more information, see
"Setting of enlargement or reduction for copying," page 1.34.
Note: The copy enlargement and reduction rate setting affects only copying. It
doesn't affect the fax reception reduction rate (see pages 2.3–2.4).
will show:
LCD
Number of copies

Paper source and paper size

If you wish to select the paper supply source manually, press
repeatedly until your desired paper source appears:
Copy Ready Num: 1
C1:Ltr 100%
C2:Legl 100%
C3:Ltr 100%
Tray Enter
You may also choose from either the standard paper cassette (
Multipurpose tray ( ). If your machine also has either or both of the two optional
T
cassettes, you may also choose ( 2) or (
C
while the display shows:
ENTER
Copy Ready Num: 1
Tray Enter
Then, press ? to set paper size. This is the size of the paper in either
PAPER SIZE
the paper cassette (or cassettes, if you have one or both of the optional cassettes)
or Multipurpose tray. You can set letter- or legal-sized paper in the paper cassette(s),
and letter-, legal- or half-letter-sized paper in the Multipurpose tray. When you set
transparency film on the multipurpose tray, please select "OHP" mode.
Copy Ready Num: 1
T:Ltr 100%
T:Legl 100%
T:HLtr 100%
T:OHP 100%
Contrast level
See "Contrast" (pages 1.21–1.22) for more information.

Sort copy

Press to toggle (switch on or off) sorting copy if necessary. The initial
SORT COPY
setting is Off.
Getting started
?
PAPER SIZE
Appears only when the indicated
optional paper cassette is attached.
1) or the
C
3). To use the Multipurpose tray, press
C
1.31