Digital Output Terminal 2 (Do2); Digital Output Terminal 3 (Do3) - Delta Electronics ASDA-B Series User Manual

P2 - 19 DO2

Digital Output Terminal 2 (DO2)

Default: 103
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 110
Settings:
See P2-18 for explanation.
P2 - 20 DO3

Digital Output Terminal 3 (DO3)

Default: 7
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 110
Settings:
See P2-18 for explanation.
P2 - 21 Reserved
P2 - 22 Reserved
P2 - 23 NCF Notch Filter (Resonance Suppression)
Default: 1000
Applicable Control Mode: P/S/T
Unit: Hz
Range: 50 ~ 1000
Settings:
This parameter is used to set resonance frequency of mechanical system. It can be used to
suppress the resonance of mechanical system. If P2-24 is set to 0, this parameter is disabled.
P2-24
P2-23
Revision January, 2009
Gain (db)
Frequency (Hz)
Chapter 7 Servo Parameters|ASDA-B Series
Communication Addr.: 0213H
Related Section:
Section 3.3.4, Table 7.B
Communication Addr.: 0214H
Related Section:
Section 3.3.4, Table 7.B
Communication Addr.: 0215H
Communication Addr.: 0216H
Communication Addr.: 0217H
Related Section:
Section 6.3.7, P2-24
7-45