Memory Block Position Number (Romx); Status Of Memory Block (Romx) - Delta Electronics ASDA-B Series User Manual

Chapter 7 Servo Parameters|ASDA-B Series
• Reserve / Clear Memory Block Function Settings
0: Reserve memory block
1: Clear memory block
When the clear memory block function is selected, the memory block will be cleared.
This parameter setting will return to its default setting after clear function is executed successfully.
P8 - 12 KRNO

Memory Block Position Number (ROMx)

Default: 0
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 24
This parameter is used to determine the memory block number (ROMx) shown on the keypad
display.
P8 - 13★
KBL0

Status of Memory Block (ROMx)

Default: 0
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 23999
Settings:
ASD-PU-01A
• Drive Rated Power Settings:
002: 200W
003: 400W (F604)
004: 750W
005: 1kW
006: 1.5kW
007: 2kW
103: 400W(F804)
This parameter displays the status of memory block number (ROMx) by referring the setting of
parameter P8-12.
7-72
Communication Addr.: 080CH
Related Section: N/A
Communication Addr.: 080DH
Related Section: N/A
ASD-PU-01B
• Motor Inertia Settings:
1: Low inertia
2: Medium inertia
3: High inertia
• Drive Series Settings:
1: ASDA-A series
2: ASDA-B series
Revision January, 2009