Performing Internal Logging - Omron ZW-XC7 User Manual

5-6 Performing internal logging

Up to 2000000 data of measurement values can be logged in the Sensor Controller's internal memory.
Item
LoggingMode
SamplePeriod
 Explorer pane
→ Edit pane
→ Online setting window : [Internal Logging]
1
Set the logging conditions.
Select the [Preservation interval], [logging data
count], and the TASK to store the data for.
Item Setting item
Data logging Data interval
conditions
Number of
logging data
OUT1
OUT2
OUT3
OUT4
2
Click the [Logging start] button to start
internal logging.
A confirmation message is displayed. Click
[Yes] to start internal logging.
Note
Starting internal logging can also be executed by No-protocol communications or parallel I/O.
ZW-7000 User's Manual
Output items Description
Internal Indicates the internal logging.
1 to 99999 Indicates the storage interval.
: [(ZW model name)] (double click)
: [Online] icon (
Range
1 to 1000
1 to 2000000
OFF/ON
OFF/ON
OFF/ON
OFF/ON
)
Description
Set the data storage interval.
If "1" is set , all measured data is stored, and "2" is set, one
measurement value is stored every two measurement.
Set the number of data to store for the data that is assigned
to each OUT.
Set whether to store the measurement results for OUT1.
Set whether to store the measurement results for OUT2.
Set whether to store the measurement results for OUT3.
Set whether to store the measurement results for OUT4.

Performing internal logging

155