Omron ZW-XC7 User Manual page 150

4
Set the trigger condition.
• When the trigger target is "Data slope"
Item
Trigger condition Condition
• When the trigger target is "Data window (In)"
Item
Trigger condition Judgment value
• When the trigger target is "Data window (out)"
Item
Trigger condition Judgment value
• When the trigger target is "I/O"
Item
Trigger condition Condition
148
Displaying measured values in graphs
Setting item Range
=
≠
>
≥
<
≤
Judgment -999.999999 to
999.999999 mm
Setting item Range
-999.999999 to
1 999.999999 [mm]
Judgment value -999.999999 to
2 999.999999 [mm]
Setting item Range
-999.999999 to
1 999.999999 [mm]
Judgment value -999.999999 to
2 999.999999 [mm]
Setting item Range
TRUE (rising)
False (falling)
Description
When the measurement results are the same value as the
judgment value, the trigger condition is considered to have
been met.
When the measurement results are a different value from
the judgment value, the trigger condition is considered to
have been met.
When the measurement results are greater than the
judgment value, the trigger condition is considered to have
been met.
When the measurement results are greater than or equal to
the judgment value, the trigger condition is considered to
have been met.
When the measurement results are less than the judgment
value, the trigger condition is considered to have been met.
When the measurement results are less than or equal to
the judgment value, the trigger condition is considered to
have been met.
This is the judgment value for the measurement results.
Description
When the measurement results are greater than or equal to
judgment value 1 and less than or equal to judgment value
2, the trigger condition is considered to have been met.
Description
When the measurement results are less than judgment
value 1 or greater than judgment value 2, the trigger
condition is considered to have been met.
Description
When the I/O signal rises, the trigger condition is
considered to have been met.
When the I/O signal falls, the trigger condition is considered
to have been met.
ZW-7000 User's Manual