Omron ZW-XC7 User Manual page 183

I/O setting Digital output
[I/O] [DIGTAL]
(cont'd) (cont'd)
Analog output
[ANALOG
*1. The same "OUTPUT" is set for all banks. The output destination cannot be set separately for individual banks.
*2. For more detail, refer to the following.
7-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor User's Manual for Communications Settings
(Cat. No.Z363-E1-01).
ZW-7000 User's Manual
Output
*1
destination
[V OR C]
Output target
[OUTPUT]
Monitor focus
[FOCUS]
Calibration
[CALIB]
Clamp value:
[CLAMP]
Setting Option/Setting Range
0x7FFFFFFF[MAX] /
Clamp value 999999999[99999] / 0 [0] /
[CLAMP] -999999999 [-99999] /
0x80000000[MIN]*
Output
*1
destination Voltage output /Current output
[V OR C]
Off [OFF]/TASK1 [TASK1]
Output target
TASK2 [TASK2]/TASK3 [TASK3]/
[OUTPUT]
TASK4 [TASK4]
Focus
*1
Off [OFF] /On [ON]
[FOCUS]
Focus Current: 4/5/6/7/8/9/10/11/12/13/14/15/
current/ 16/17/18/19/20mA (default value: 4mA)
voltage 1 Current: -10/-9/-8/-7/-6/-5/-4/-3/-2/-1/
[CUR1]/ 0/1/2/3/4/5/6/7/8/9/10V
[VOLT1] (default value: -10V)
Measurement
-999.999999 to 999.999999 mm
value 1
(default value: -0.5)
[MEAS1]
Focus Current: 4/5/6/7/8/9/10/11/12/13/14/15/
current/ 16/17/18/19/20mA (default value: 20mA)
voltage 2 Current: -10/-9/-8/-7/-6/-5/-4/-3/-2/-1/
[CUR2]/ 0/1/2/3/4/5/6/7/8/9/10V
[VOLT2] (default value: 10V)
Measurement
-999.999999 to 999.999999 mm
data2
(default value: 0.5)
[MEAS2]
Calibration
*1
Off /On
[CALIB]
Calibration Current: 4/5/6/7/8/9/10/11/12/13/14/15/
current/ 16/17/18/19/20mA (default value: 4mA)
voltage 1 Current: -10/-9/-8/-7/-6/-5/-4/-3/-2/-1/
[CUR1]/ 0/1/2/3/4/5/6/7/8/9/10V
[VOLT1] (default value: -10V)
Calibration
value 1 -999 to 999 (default value: 0)
[ADJ1]
Calibration Current: 4/5/6/7/8/9/10/11/12/13/14/15/
current/ 16/17/18/19/20mA (default value: 20mA)
voltage 2 Current: -10/-9/-8/-7/-6/-5/-4/-3/-2/-1/
[CUR2]/ 0/1/2/3/4/5/6/7/8/9/10V
[VOLT2] (default value: 10V)
Calibration
value 2 -999 to 999 (default value: 0)
[ADJ2]
Current output: MIN[MIN] (approx.
3.4mA)/4mA/5mA/.../19mA/20mA/
MAX[MAX] (approx, 20.8mA) (default
Clamp
value: MAX)
value:
Current output: MIN[MIN] (approx.
[CLAMP]
-10.8V)/-10V/-9V/.../9V/10V/
MAX[MAX] (approx.10.8V)
(default value: MAX)
Search from Menu Tree
Pages
*1
*2
*1
/
*2
*2
*2
*2
181