8-6 Setting Sensing
Set the Measurement cycle
Setting the Measurement Cycle p.98
As an example, here is an explanation of the procedure for setting the measurement cycle to "400 ms".
Operating procedure
Steps
Key operation
1
2
3
4
5
194
Setting Sensing
Display
Description
Press and hold the
mode.
Press the
key.
Press the
key.
Set the measurement cycle.
Press
blinks.
To edit numerical values, use the
In this example, select "000400" and press the
Press the
key for two seconds to enter the FUNC
/
keys to select "SENS" and press the
/
keys to select "CYCLE" and press the
key to enter the editing mode, and the sub-display
/
/
key for two seconds to enter the RUN mode.
ZW-7000 User's Manual
/
keys.
key.