Initializing Settings - Omron ZW-XC7 User Manual

Setting the Number of Digits Displayed Past the Decimal Point
Set the number of digits displayed past the decimal point for when numerical values are displayed on the main
display and sub-display of the Sensor Controller.
Item Setting item
Sensor settings The number of decimal
places
1
Set the operating mode to the FUNC mode.
3-3 Switching operation modes p.85
 Explorer pane
→ Edit pane
2
Select the number of digits displayed past
the decimal point from [The number of
decimal places].
You can select from the above setting values.

Initializing Settings

Returns all banks/system settings to their default settings.
Important
• The settings of all banks/system settings are returned to the default settings regardless of the currently selected
bank number.
 Explorer pane
→ Edit pane
1
Click [Sensor setup] - [Initialize sensor].
Initialization is executed.
Note
• Settings can also be initialized by selecting and right-clicking a [(ZW model)] option from the explorer pane and
selecting "Initialize sensor" from the right-click menu.
• Operating key of Sensor Controller is allowable to initialize.
• Information for Sensor Head calibration is retained.
Initializing Settings p.231
140
Setting Measurement Mode of the Sensor
Setting value
0 Digit to 5 Digit
(default value: 4 Digits)
: [System] (double-click)
: [Sensor Settings] icon (
: [(ZW model name)] (double click)
: [Tool] icon ( )
Description
Set the number of digits displayed past the decimal point for
when numerical values are displayed on the Sensor
Controller.
)
ZW-7000 User's Manual