Omron ZW-XC7 User Manual page 116

Performing Thickness Scaling
The thickness is measured at one position and offset values are set for that measured value.
Item Setting item
Thickness scaling Setting value
 Explorer pane
→ Edit pane
→ Task Settings window : [Scaling]
1
Set the [Scaling] to OFF.
2
Click [Auto setting].
The [Scaling] popup menu appears.
3
Select [Thickness scaling], and click [Next
>].
The [Scaling] popup menu display changes to
[Thickness settings].
4
Click [STOP] to fix the [Current value], set
[Set value] and click [Next >].
The [Scaling] popup menu display changes to
[Confirm the scaling parameters], and the span
and offset values are displayed.
Note
The current measured value is displayed at
[Current value], and is refreshed at 100 ms
cycles. When [STOP] is clicked, refreshing of the
[Current value] display stops. Clicking the
[STOP] button again resumes display refreshing.
5
Click [OK].
Note
Thickness scaling can also be executed by the operating keys on the Sensor Controller.
Performing Thickness Scaling p.210
114
Setting the Output Conditions
Setting value
-999.999999 to 999.999999 [mm]
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
Correct the measured value, and set the value to display.
)
ZW-7000 User's Manual