User could also filter alert logs by selecting a certain event category, type of alert log, and/or specifying a certain
time period. The matching results will be displayed after clicking on
types by the system:
1. Generate Alert: Generated when alert events happen, for example, alert logs for disk usage exceeding the
alert threshold.
2. Restore to Normal: Generated when alert events being cleared, for example, logs for disk usage dropping
back below the alert threshold.
User could filter out alert logs of "Generate Alert" or "Restore to Normal" by specifying the type according to
need. The following figure shows an example of filtering out alert logs of type of "Restore to Normal".
Figure 216: System Events->Alert Log
Figure 217: Filter for Alert Log
UCM6200 Series User Manual
. Alert logs are classified into two
P a g e
|
309