Restore Factory Default Settings; Change Log - Grandstream Networks GXP17 Series User Manual

RESTORE FACTORY DEFAULT SETTINGS

Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before
you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device
to your VoIP service provider.
Please follow the instructions below to reset the phone:
1. Press MENU button to bring up the keypad configuration menu.
2. Select "System" and enter.
3. Select "Factory Reset".
4. A warning window will pop out to make sure a reset is requested and confirmed.
5. Press the "Yes" softkey to confirm and the phone will reboot. To cancel the Reset, press "No" softkey instead.

CHANGE LOG

This section documents significant changes from previous versions of user guide for GXP1760W/GXP1780/GXP1782. Only major new
features or major document updates are listed here. Minor updates for corrections or editing are not documented here.
Firmware Version 1.0.1.126
No major changes.
Firmware Version 1.0.1.125
No major changes.
Firmware Version 1.0.1.123
No major changes.
Firmware Version 1.0.1.119
No major changes.
Firmware Version 1.0.1.118
No major changes.
Firmware Version 1.0.1.116
No major changes.
Firmware Version 1.0.1.106
No Major Changes.
Firmware Version 1.0.1.98
No Major Changes.
Firmware Version 1.0.1.89
Added Support to edit VPKs using device's keypad [Configuring VPKs]
Firmware Version 1.0.1.82
No major changes.