Figure 172: Enable/Disable Feature Codes - Grandstream Networks UCM6206 User Manual

Direct Dial Mobile
Phone Prefix
Call Completion
Request
Call Completion Cancel
Enable Spy
Listen Spy
Whisper Spy
Barge Spy
Enable Inbound Multiple
Mode
Inbound Default Mode
Inbound Mode 1
The UCM6200 also allows user to one click enable / disable specific feature code. As shown below:
If you have the permission to call mobile phone number, use this prefix plus
the extension number can dial the mobile phone number of this extension
directly.
•
Default Code: *11
•
This code is for the user who wants to use Call Completion to complete
a call.
•
Default Code: *12
•
This code is for the user who wants to cancel Call Completion request.
Check this box to enable spy feature codes.
This is the feature code to listen in on a call to monitor performance. Monitor's
line will be muted, and neither party will hear from the monitor's extension.
The default setting is *54.
This is the feature code to speak to one side of the call (for example, whisper
to employees to help them handle a call). Only one side will be able to hear
from the monitor's extension. The default setting is *55.
This is the feature code to join in on the call to assist both parties. The default
setting is *56.
If enabled, user can switch between different inbound route modes with
feature code. By default, this option is disabled.
This feature code is used to switch inbound route mode to default mode. The
default setting is *61.
This feature code is used to switch inbound route mode to mode 1. The
default setting is *62.

Figure 172: Enable/Disable Feature codes

UCM6200 Series User Manual
P a g e | 262