The WakeUp service can be used to schedule a reminder or wake up calls to any valid destination. This service is
available on the UCM6200 as a separated module.
There are three ways to set up Wakeup Service:
Using admin login
-
Using user portal
-
Using feature code
-
WakeUp Service using admin login
Login to the UCM as admin.
-
WakeUp service can be found under "PBX -> Call Features -> Wakeup Service", click on
-
Click
and
-
Enable Wakeup Service
Name
WAKEUP SERVICE
to create a new wakeup service. The following window will popup.
Figure 168: Create New Wakeup Service
to apply the changes.
Table 80: Wakeup Service
Enable Wakeup service.
Enter a name to identify the wakeup service.
UCM6200 Series User Manual
P a g e
|
253