Batch Add Iax Extensions; Table 47: Batch Add Iax Extension Parameters - Grandstream Networks UCM6206 User Manual

PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, Ilbc, ADPCM, LPC10, H.264,
H.263, H.263p and VP8.

Batch Add IAX Extensions

Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add IAX
Extensions".
General
Start Extension Configure the starting extension number of the batch of extensions to be added.
Create Number Specify the number of extensions to be added. The default setting is 5.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note:
Users need to have the same level as or higher level than an outbound rule's
privilege in order to make outbound calls from this rule.
Enable Voicemail Enable Voicemail for the user. The default setting is "Yes".
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
•
SIP/IAX Password
•
•
Configure Voicemail password (digits only) for the users.
•
Voicemail
Password
•
•
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under web GUI->Internal Options->IVR Prompt:
Ring Timeout
General Preference. The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.

Table 47: Batch Add IAX Extension Parameters

User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
UCM6200 Series User Manual
P a g e | 142