Grandstream Networks UCM6206 User Manual page 139

Simultaneously extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
Set the external number to be rang simultaneously. '-' is the connection character
External Number
which will be ignored.
Time Condition for
Ring the external number simultaneously along with the extension on the basis of this
Ring
time condition.
Simultaneously
Hotline
If enabled, hotline dialing plan will be activated, a pre-configured number will be used
Enable Hotline
according to the selected Hotline Type.
Configure the Hotline Number
Hotline Number
Configure the Hotline Type:
•
Hotline Type
•
Other Settings
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
Ring Timeout the global ring timeout setting under web GUI->Internal Options->IVR Prompt:
General Preference. The valid range is between 5 seconds and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under web GUI->CDR->Recording
Auto Record
Files.
•
•
Skip Trunk Auth
•
Time Condition for If "Skip Trunk Auth" is set to "By Time", select a time condition during which users can
Skip Trunk Auth skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
If enabled, this extension will be added to LDAP Phonebook PBX list; if disabled, this
Enable LDAP
extension will be skipped when creating LDAP Phonebook.
Music On Hold Select which Music On Hold class to suggest to extension when putting the active call
Immediate Hotline: When the phone is off-hook, UCM6200 will immediately dial
the preset number
Delay Hotline: When the phone is off-hook, if there is no dialing within 5 seconds,
UCM6200 will dial the preset number.
If set to "Yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
UCM6200 Series User Manual
P a g e | 138