Grandstream Networks UCM6206 User Manual page 52

Value
LAN 1 / LAN 2 (when Method is set to "Dual")
If "Dual" is selected as "Method", users will need assign the default interface to be LAN 1
Default
(mapped to UCM6202 WAN port) or LAN 2 (mapped to UCM6202 LAN port) and then
Interface
configure network settings for LAN 1/LAN 2. The default interface is LAN 2.
IP Method Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Subnet Mask Enter the subnet mask address for static IP settings. The default setting is 255.255.0.0.
Enter the gateway IP address for static IP settings when the port is assigned as default
Gateway IP
interface. The default setting is 0.0.0.0.
DNS Server 1 Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
Enter the DNS server 2 address for static IP settings.
DNS Server 2
Enter the user name to connect via PPPoE.
User Name
Password Enter the password to connect via PPPoE.
Layer 2 QoS
802.1Q/VLAN Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value is 0.
Tag
Layer 2 QoS
Assign the priority value of the layer 2 QoS packets for LAN port. The default value is 0.
802.1p Priority
Value
IPv6 Address
WAN (when "Method" is set to "Route")
IP Method Select Auto or Static. The default setting is Auto
IP Address Enter the IP address for static IP settings.
IP Prefixlen Enter the Prefix length for static settings. Default is 64
DNS Server 1 Enter the DNS server 1 address for static settings.
DNS Server 2 Enter the DNS server 2 address for static settings.
LAN (when Method is set to "Route")
Select Disable, Auto or DHCPv6.
Disable: the DHCPv6 server is disabled.
DHCP Server
Auto: Stateless address auto configuration using NDP protocol.
DHCPv6: Stateful address auto configuration using DHCPv6 protocol.
Enter DHCP prefix. (Default is 2001:db8:2:2::)
DHCP Prefix
DHCP
Enter the Prefix length for static settings. Default is 64
prefixlen
DNS Server 1 Enter the DNS server 1 address for static settings. Default is (2001:4860:4860::8888 )
DNS Server 2 Enter the DNS server 2 address for static settings. Default is (2001:4860:4860::8844 )
UCM6200 Series User Manual
P a g e | 51