Grandstream Networks UCM6206 User Manual page 144

Enable automatic recording for the calls using this extension. The default setting is
Auto Record disabled. The recording files can be accessed under web GUI->CDR->Recording
Files.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
Select which Music On Hold class to suggest to extensions when putting them on
Music On Hold
hold.
If enabled, the batch added extensions will be added to LDAP Phonebook PBX list;
Enable LDAP if disabled, the batch added extensions will be skipped when creating LDAP
Phonebook.
Call Duration Limit Configure the maximum duration of call-blocking.
IAX Settings
Max Number of Calls Configure the maximum number of calls allowed for each remote IP address.
Configure to enable/disable requiring call token. If set to "Auto", it might lock out
Require Call Token users who depend on backward compatibility when peer authentication credentials
are shared between physical endpoints. The default setting is "Yes".
Other Settings
SRTP Enable SRTP for the call. The default setting is "No".
Select Fax Mode for this user. The default setting is "None".
•
•
Fax Mode
This option controls how the extension can be used on devices within different types
of network.
•
•
Strategy
•
The default setting is "Allow All".
If enable "All", users do not need to enter password when making an outbound call.
Skip Trunk Auth
If enable "Follow Me", the call can dial out via follow me without password.
Codec Preference Select audio and video codec for the extension. The available codecs are: PCMU,
None: Disable Fax.
Fax Detect: Fax signal from the user/trunk during the call can be detected and
the received Fax will be sent to the Email address configured for this extension.
If no Email address can be found for the user, the Fax will be sent to the default
Email address configured in Fax setting page under web UI->PBX->Internal
Options->Fax/T.38.
Allow All
Device in any network can register this extension.
Local Subnet Only
Only the user in specific subnet can register this extension. Up to three subnet
addresses can be specified.
A Specific IP Address.
Only the device on the specific IP address can register this extension.
UCM6200 Series User Manual
P a g e | 143