1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. IP Phone
  5. UCM6206
  6. User manual

Grandstream Networks UCM6206 User Manual page 51

Ip pbx
Hide thumbs
Table of Contents

Advertisement

DNS Server 1
Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Layer 2 QoS
802.1Q/VLAN
Assign the VLAN tag of the layer 2 QoS packets for WAN port. The default value is 0.
Tag
Layer 2 QoS
802.1p Priority
Assign the priority value of the layer 2 QoS packets for WAN port. The default value is 0.
Value
LAN (when Method is set to "Route")
Enter the IP address assigned to LAN port. The default setting is 192.168.2.1.
IP Address
Subnet Mask
Enter the subnet mask. The default setting is 255.255.255.0.
DHCP Server
Enable or disable DHCP server capability. The default setting is "Yes".
Enable
DNS Server 1
Enter DNS server address 1. The default setting is 8.8.8.8.
DNS Server 2
Enter DNS server address 2. The default setting is 208.67.222.222.
Allow IP
Enter the DHCP IP Pool starting address. The default setting is 192.168.2.100.
Address From
Allow IP
Enter the DHCP IP Pool ending address. The default setting is 192.168.2.254.
Address To
Default IP
Enter the IP lease time (in seconds). The default setting is 43200.
Lease Time
LAN (when Method is set to "Switch")
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the subnet mask address for static IP settings. The default setting is 255.255.0.0.
Subnet Mask
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
Gateway IP
DNS Server 1
Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Layer 2 QoS
802.1Q/VLAN
Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value is 0.
Tag
Layer 2 QoS
Assign the priority value of the layer 2 QoS packets for LAN port. The default value is 0.
802.1p Priority
UCM6200 Series User Manual
P a g e
|
50

Advertisement

Table of Contents
loading

Related Manuals for Grandstream Networks UCM6206

Related Products for Grandstream Networks UCM6206

This manual is also suitable for:

Ucm6200 seriesUcm6202Ucm6204

Table of Contents