The UCM6200 extension group feature allows users to assign and categorize extensions in different groups to
better manage the configurations on the UCM6200. For example, when configuring "Enable Filter on Source
Caller ID", users could select a group instead of each person's extension to assign. This feature simplifies the
configuration process and helps manage and categorize the extensions for business environment.
Configure Extension Groups
Extension group can be configured via Web GUI->PBX->Call Features->Extension Groups.
•
Click on "Create New Extension Group" to create a new extension group.
•
Click on
to edit the extension group.
Select extensions from the list on the left side to the right side.
•
Click on
to delete the extension group.
Using Extension Groups
Here is an example where the extension group can be used. Go to Web GUI->PBX->Basic/Call Routes-
>Outbound Routes and select "Enable Filter on Source Caller ID". Both single extensions and extension groups
will show up for users to select.
EXTENSION GROUPS
Figure 144: Edit Extension Group
UCM6200 Series User Manual
P a g e
|
223