Create New Iax Extension; Table 37: Sip Extension Configuration Parameters->Specific Time; Table 38: Iax Extension Configuration Parameters->Basic Settings - Grandstream Networks UCM6206 User Manual

Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
Support Hot- If enabled, SIP Password will accept only alphabet characters and digits. Auth ID will
be changed to the same as Extension.
Desking Mode
Enable LDAP If enabled, the extension will be added to LDAP Phonebook PBX list.
Enable WebRTC
Enable registration and call from WebRTC.
Support
Specify which Music On Hold class to suggest to the bridged channel when putting
Music On Hold
them on hold.
Call Duration Limit The maximum duration of call-blocking.
Maximum Call
The maximum call duration (in seconds). The default value 0 means no limit.
Duration
Custom Call-info If enabled, when a call is sent to this extension from UCM, the SIP INVITE message
for Auto Answer will contain a Call-info header indicating auto answer.
Specific Time
Click to add Time Condition to configure specific time for this extension.
Time Condition

Create New IAX Extension

The UCM6200 supports Inter-Asterisk eXchange (IAX) protocol. IAX is used for transporting VoIP telephony
sessions between servers and terminal devices. IAX is similar to SIP but also has its own characteristic. For
more information, please refer to RFC 5465.
To manually create new IAX user, go to Web GUI->PBX->Basic/Call Routes->Extensions. Click on "Create
New User"->"Create New IAX Extension" and a new dialog window will show for users to fill in the extension
information. The configuration parameters are as follows.
General
Extension The extension number associated with the user.
Configure the CallerID Number that would be applied for outbound calls from this
CallerID Number
user.
Table 37: SIP Extension Configuration Parameters->Specific Time
Table 38: IAX Extension Configuration Parameters->Basic Settings
UCM6200 Series User Manual
P a g e | 130