Ip Ping; Traceroute; Figure 243: Ping - Grandstream Networks UCM6206 User Manual

Storage to External Device
Capture Filter
Start
Stop
Download
The output result is in .pcap format. Therefore, users could specify the capture filter as used in general network
traffic capture tool (host, src, dst, net, protocol, port, port range) before starting capturing the trace.

IP Ping

Enter the target host in host name or IP address. Then press "Start" button. The output result will dynamically
display in the window below.

Traceroute

Enter the target host in host name or IP address. Then press "Start" button. The output result will dynamically
display in the window below.
Check this box to activate storage of the capture either on the USB
or SD Card.
Enter the filter to obtain the specific types of traffic, such as (host,
src, dst, net, proto...).
Click to start the trace.
Click to stop the trace.
Click to download the trace if trace is stored locally.

Figure 243: Ping

UCM6200 Series User Manual
P a g e | 331