Grandstream Networks UCM6206 User Manual page 129

•
•
Configure the Call Forward Busy target number. If not configured, the Call Forward
Call Forward Busy
Busy feature is deactivated. The default setting is deactivated.
Select time condition for Call Forward Busy. The available time conditions are "Office
Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of Office Time or Holiday"
and "Specific".
Note:
•
CFB Time
Condition
•
•
Do Not Disturb If enabled the extension will ignore all incoming calls
Select time condition for Do Not Disturb. The available time conditions are "Office
Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of Office Time or Holiday"
and "Specific".
Note:
•
DND Time
Condition
•
Office Time and Holiday could be configured on page Settings->Time Settings->Office
Time/Holiday page.
If DND is enabled, all calls to this extension will be rejected except the numbers listed
DND Whitelist on this list.
Note: The maximum number on the Whitelist is 10.
CC Settings
If enabled, UCM6200 will automatically alert this extension when a called party is
Enable CC available, given that a previous call to that party failed for some reason. By default it's
disabled.
Two modes for Call Completion are supported:
•
CC Mode
•
The default setting is "Normal".
Configure the maximum number of CCSS agents which may be allocated for this
CC Max Agents
period.
Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Office Time and Holiday could be configured on page Settings->Time Settings-
>Office Time/Holiday page.
"Specific" has higher priority to "Office Times" if there is a conflict in terms of time
period.
Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Office Time and Holiday could be configured on page Settings->Time Settings-
>Office Time/Holiday page.
"Specific" has higher priority to "Office Times" if there is a conflict in terms of time
period.
Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Normal: This extension is used as ordinary extension.
For Trunk: This extension is registered from a PBX.
UCM6200 Series User Manual
P a g e | 128