Table 63: Conference Settings - Grandstream Networks UCM6206 User Manual

If enabled, conference participant could press the * key to access the conference
Enable Caller Menu
bridge menu. The default setting is "No".
If enabled, the calls in this conference bridge will be recorded automatically in a
.wav format file. All the recording files will be displayed and can be downloaded in
Record Conference
the conference web page. The default setting is "No".
If enabled, if there are users joining or leaving the conference, voice prompt or
notification tone won't be played. The default setting is "No".
Quiet Mode
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Wait For Admin Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not be
announced.
If enabled, users could press 0 to invite other users (with the users' permission) or
press 1 to invite other users (without the user's permission) to join the conference.
Enable User Invite The default setting is "No".
Note:
Conference administrator can always invite other users without enabling this option.
If enabled, the caller will be announced to all conference participants when there
the caller joins the conference. The default setting is "No".
Announce Callers
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, no authentication will be required when joining the conference call. The
Public Mode
default setting is "Yes".
If enabled, the UCM6200 will play Hold music when there is only one user in the
Play Hold Music
conference. The default setting is "No".
Select the music on hold class to be played in conference call. Music On Hold class
Music On Hold
can be set up under web UI->PBX->Internal Options->Music On Hold.
Skip Authentication
If enabled, the invitation from Web GUI for a conference bridge with password will
When Inviting User
via Trunk from Web skip the authentication for the invited users. The default setting is "No".
GUI
Conference Settings contains the following options:
Enable Talk detection

Table 63: Conference Settings

If enabled, the AMI will send the corresponding event when a user
starts or ends talking.
UCM6200 Series User Manual
P a g e | 191