Change Log - Grandstream Networks WP810 User Manual

3. A dialog box will pop up to confirm factory reset.
4. Click OK to restore the phone to factory settings.

CHANGE LOG

This section documents significant changes from previous firmware versions. Only major new features or major document updates are listed here. Minor
updates for corrections or editing are not documented here.
Firmware Version 1.0.11.51
Added support for new LCD modules through hardware versions on WP822 and WP825 models.
Added support for Hebrew language. [Hebrew]
Firmware Version 1.0.11.43
No Major Changes.
Firmware Version 1.0.11.40
No Major changes.
Firmware Version 1.0.11.34
Added support for attended transfer feature on WP810 as WP822/WP825.
Added support for new Audio control configuration parameters.
Added support for 802.11k and 802.11v Wi-Fi Standards.
Firmware Version 1.0.11.28
Added support to allow PTT audio to come through the 3.5 mm audio jack output. [PTT]
Added support to disable/enable the function to hang up the call when the device is placed upside down.
Added support for attended Transfer before the answer.
Firmware Version 1.0.11.22
No major changes.
Firmware Version 1.0.11.20
Added support to connect up to 20 SSIDs
Added door system support and GDS settings
Added support for Off-hook Auto Dial
Figure 66: Web GUI – Confirm Factory Reset
[Audio
[Wi-Fi settings]
[Attended Transfer]
[Auto Connection]
[Grandstream Door System
[Off-hook Auto Dial]
[Configuring the
[Attended Transfer]
control]
Integration]
LCD]
[Ending a call]