Grandstream Networks UCM6206 User Manual page 261

Call Forward No Answer
Deactivate
Call Forward
Unconditional Activate
Call Forward
Unconditional
Deactivate
Feature Misc
Feature Code Digits
Timeout
Call Park
Parked Lots
Use Parklot as
Extension
Parking Timeout (s)
Feature Codes
Voicemail Access Code
My Voicemail
Agent Pause
•
Default Code: *93.
•
Default Code: *72.
•
Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.
•
Default Code: *73.
•
Default Setting: 1000.
•
Configure the maximum interval (in milliseconds) between the digits input
to activate the feature code.
•
Default Extension: 700.
•
During an active call, initiate blind transfer and then enter this code to
park the call.
•
Default Extension: 701-720.
•
These are the extensions where the calls will be parked, i.e., parking lots
that the parked calls can be retrieved.
•
If checked, the parking lot number can be used as extension. The user
can transfer the call to the parking lot number to park the call. Please
note this parking lot number range might conflict with extension range.
•
Default setting: 300.
•
This is the timeout allowed for a call to be parked. After the timeout, if the
call is not picked up, the extension who parks the call will be called back.
•
Default Code: *98.
•
Enter *98 and follow the voice prompt. Or dial *98 followed by the
extension and # to access the entered extension's voicemail box.
•
Default Code: *97.
•
Press *97 to access the voicemail box.
•
Default Code: *83.
•
Pause the agent in all call queues.
UCM6200 Series User Manual
P a g e | 260