on hold.
Call Duration Limit
Configure the maximum duration of call-blocking.
Specific Time
Time Condition
Click to add Time Condition to configure specific time for this extension.
Batch Add Extensions
Batch Add SIP Extensions
In order to add multiple SIP extensions, BATCH add can be used to create standardized SIP extension accounts.
However, unique extension user name can't be set using BATCH add.
Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add SIP
Extensions".
General
Start Extension
Configure the starting extension number of the batch of extensions to be added.
Specify the number of extensions to be added. The default setting is 5.
Create Number
Specify the interval between extensions as preferred when creating a batch of
Extension Interval
extension.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
Permission
setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege in order to make outbound calls from this rule.
Enable Voicemail
Enable Voicemail for the user. The default setting is "Yes".
Enable WebRTC
Enable WebRTC support.
Support
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
•
SIP/IAX Password
•
•
Configure Voicemail password (digits only) for the users.
Voicemail
•
Password
Table 45: FXS Extension Configuration Parameters->Specific Time
Table 46: Batch Add SIP Extension Parameters
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
UCM6200 Series User Manual
P a g e
|
139