Grandstream Networks UCM6206 User Manual page 260

Disconnect
Call Park
Audio Mix Record
DND/Call Forward
Do Not Disturb (DND)
Activate
Do Not Disturb (DND)
Deactivate
Call Forward Busy
Activate
Call Forward Busy
Deactivate
Call Forward No Answer
Activate
•
Default code: *0.
•
Enter the code during active call. It will disconnect the call.
•
Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: #72.
•
Enter the code during active call to park the call.
•
Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: *3.
•
Enter the code followed by # or SEND to start recording the audio call
and the UCM6200 will mix the streams natively on the fly as the call is in
progress.
•
Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: *77.
•
Default code: *78.
•
Default Code: *90.
•
Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.
•
Default Code: *91.
•
Default Code: *92.
•
Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.
UCM6200 Series User Manual
P a g e | 259