Iax Settings; Iax Settings/General; Iax Settings/Registration; Table 87: Iax Settings/General - Grandstream Networks UCM6206 User Manual

The UCM6200 IAX global settings can be accessed via Web GUI->PBX->IAX Settings.

IAX Settings/General

Bind Port
Bind Address
IAX1 Compatibility
No Checksums
Delay Reject
ADSI
Music On Hold
Interpret
Music On Hold
Suggest
Bandwidth

IAX Settings/Registration

IAX Registration Options
Min Reg Expire
Max Reg Expire
IAX Thread Count
IAX Max Thread Count

IAX SETTINGS

Table 87: IAX Settings/General

Configure the port number that the IAX2 will be allowed to listen to. The default
setting is 4569.
Configure the address that the IAX2 will be forced to bind to. The default setting
is 0.0.0.0, which means all addresses.
Select to configure IAX1 compatibility. The default setting is "No".
If selected, UDP checksums will be disabled and no checksums will be
calculated/checked on systems supporting this feature. The default setting is
"No".
If enabled, the IAX2 will delay the rejection of calls to avoid DOS. The default
setting is "No".
Select to enable ADSI phone compatibility. The default setting is "No".
Specify which Music On Hold class this channel would like to listen to when being
put on hold. This music class is only effective if this channel has no music class
configured and the bridged channel putting the call on hold has no "Music On
Hold Suggest" setting.
Specify which Music On Hold class to suggest to the bridged channel when
putting the call on hold.
Configure the bandwidth for IAX settings. The default setting is "Low".

Table 88: IAX Settings/Registration

Configure the minimum period (in seconds) of registration. The default setting is
60.
Configure the maximum period (in seconds) of registration. The default setting is
3600.
Configure the number of IAX helper threads. The default setting is 10.
Configure the maximum number of IAX threads allowed. The default setting is
100.
UCM6200 Series User Manual
P a g e | 273