Grandstream Networks UCM6206 User Manual page 185

Trunks Select the trunk to configure the inbound rule.
•
•
DID Pattern
•
After creating the inbound route, users can choose to enable and disable it. If the
Disable This Route route is disabled, it will not take effect anymore. However, the route settings will
remain in UCM. Users can enable it again when it's needed.
Prepend Trunk Name Prepend trunk name to display.
Configure the Alert-Info, when UCM6200 receives an INVITE request, the Alert-
Alert-Info
Info header field specifies an alternative ring tone to the UAS.
Multiple mode allows user to switch between destinations of the inbound rule by
Inbound Multiple feature codes. Configure related feature codes in the "Feature Codes" page. If
Mode this option is enabled, user can use feature code to switch between different
destinations.
Select the default destination for the inbound call.
•
•
•
•
•
•
•
Default Destination
•
•
•
•
•
•
All patterns are prefixed with the "_".
Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Example: [12345-9] - Any digit from 1 to 9.
The pattern can be composed of two parts, divided by a '/' character. The
first part is used to specify the dialed number the second part is used to specify
the caller ID and it is optional, if set it means only the extension with the specific
caller ID is allowed to call in or call out. For example, patter '_2XXX/1234'
means the only extension with the caller ID '1234' is allowed to use this rule.
Extension
Voicemail
Conference Room
Queue
Ring Group
Paging/Intercom
Voicemail Group
Fax
DISA
IVR
Dial by Name
External Number
By DID
When "By DID" is used, the UCM6200 will look for the destination based on
the number dialed, which could be local extensions, conference, call queue,
UCM6200 Series User Manual
P a g e | 184