Table 43: Fxs Extension Configuration Parameters->Media - Grandstream Networks UCM6206 User Manual

provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
in order to make outbound calls using this rule.
Enable Voicemail Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the voicemail box.
Voicemail
A random numeric password is automatically generated. It is recommended to use
Password
the random generated password for security purpose.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
If selected, this extension will be disabled on the UCM6200.
Disable This
Note:
Extension
The disabled extension still exists on the PBX but can't be used on the end device.
User Settings
Configure the first name of the user. The first name can contain characters, letters,
First Name
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
Last Name
digits and _.
Email Address Fill in the Email address for the user. Voicemail will be sent to this Email address.
Configure the password for user portal access. A random numeric password is
User Password automatically generated. It is recommended to use the randomly generated password
for security purpose.
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under web GUI->PBX-
>Internal Options->Language. The dropdown list shows all the current available
Language
voice prompt languages on the UCM6200. To add more languages in the list, please
download voice prompt package by selecting "Check Prompt List" under web UI-
>PBX->Internal Options->Language.
Analog Settings
Call Waiting Configure to enable/disable call waiting feature. The default setting is "No".
If configured, the # key can be used as SNED key after dialing the number on the
User '#' as SEND
analog phone. The default setting is "Yes".
Table 43: FXS Extension Configuration Parameters->Media
UCM6200 Series User Manual
P a g e | 135