Pickup Groups; Configure Pickup Groups; Configure Pickup Feature Code; Figure 146: Edit Pickup Group - Grandstream Networks UCM6206 User Manual

The UCM6200 supports pickup group feature which allows users to pick up incoming calls for other extensions
if they are in the same pickup group, by dialing "Pickup Extension" feature code (by default *8).

Configure Pickup Groups

Pickup groups can be configured via Web GUI->PBX->Call Features->Pickup Groups.
•
Click on "Create New Pickup Group" to create a new pickup group.
•
Click on to edit the pickup group.
Select extensions from the list on the left side to the right side.
•
Click on to delete the pickup group.

Configure Pickup Feature Code

When picking up the call for the pickup group member, the user only needs to dial the pickup feature code. It's
not necessary to add the extension number after the pickup feature code. The pickup feature code is configurable
under Web GUI->PBX->Internal Options->Feature Codes.
The default pickup feature code is *8.

PICKUP GROUPS

Figure 146: Edit Pickup Group

UCM6200 Series User Manual
P a g e | 225