Disa; Table 77: Disa Settings; Figure 162: Create New Disa - Grandstream Networks UCM6206 User Manual

In many situations the user will find the need to access his own IP PBX resources but he is not physically near
one of his extensions. However, he does have access to his own cell phone. In this case we can use what is
commonly known as DISA (Direct Inward System Access). Under this scenario the user will be able to call from
the outside, whether it's using his cell phone, pay phone, regular PSTN, etc. After calling into UCM6200, the
user can then dial out via the SIP trunk or PSTN trunk connected to UCM6200 as it is an internal extension.
The UCM6200 supports DISA to be used in IVR or inbound route. Before using it, create new DISA under web
GUI->Call Features->DISA.
•
Click on "Create New IVR" to add a new DISA.
•
Click on to edit the DISA configuration.
•
Click on to delete the DISA.
Name
Password
Permission

DISA

Figure 162: Create New DISA

Table 77: DISA Settings

Configure DISA name to identify the DISA.
Configure the password (digit only) required for the user to enter before using DISA
to dial out.
Note:
The password has to be at least 4 digits.
Configure the permission level for DISA. The available permissions are "Internal",
"Local", "National" and "International" from the lowest level to the highest level.
UCM6200 Series User Manual
P a g e | 242