Subscriber Level Configuration Parameters - Grandstream Networks GXP14XX Configuration Manual

4.2

Subscriber Level Configuration Parameters

This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices to be matched with the
settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber's line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream GXP11XX/GXP14XX/GXP21XX/GXV31XX each supports different
numbers of SIP accounts. The following example shows how to configure subscriber
elements for an account.
Step
Subscriber Configuration Items
Step 1
Step 2
Step 3
Step 4
Step 5
Subscriber BLF Configuration Items (GXP21xx only)
Step 1
Step 2
GRANDSTREAM GXV31XX/GXP11XX/GXP14XX/GXP21XX SERIES PHONES
©
2011 GRANDSTREAM
Command
Enable each line to be used.
Account Active = "Yes" ;
Set display name for each
line.
Example:
Account Name = "BroadSoft" ;
Set Register User ID for
each line.
Example:
SIP User_ID = "2405551111" ;
Enable SIP Authentication
for each line.
Example:
Authenticate ID =
"1111@as.mycompany.com" ;
Authenticate Password =
"welcome" ;
Configure caller ID name for
each line.
Example:
Name = "Claire Smith" ;
Configure eventlist BLF for a
line.
Example:
eventlist BLF URI =
"BLF2405551111";
Configure BLF Call-pickup
Prefix.
Example:
BLF Call-pickup Prefix =
Purpose
Enable a line of GXP21xx/GXP14xx/
GXV31XX in use.
For each line, configure the SIP Account
Name to be displayed on the phone.
The Register User ID must correspond with
the line/port setting on BroadWorks.
If the Authentication service is configured
on BroadWorks, these parameters must be
configured to match the BroadWorks
settings.
Configure the caller ID name for each line.
Configure the event list Busy Lamp Field
(BLF) from the Account Settings page.
Configure the BLF Call-pickup Prefix from
the Account Settings page.
20-BD5320-00
PAGE 17 OF 46