Download
Share
Print this page
Juniper NFX150-C-S1 Quick Start Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Router
  5. NFX150-C-S1
  6. Quick start manual
Juniper NFX150-C-S1 Quick Start Manual

Juniper NFX150-C-S1 Quick Start Manual

Network services platform
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
NFX150-C-S1 Network Services Platform Quick
Start
NFX150-C-S1 Network Services Platform Overview
The Juniper Networks NFX150 Network Services Platform is a secure, automated, software-driven customer premises equipment
(CPE) that delivers virtualized network and security services on demand. The NFX150 integrates routing, switching, and security
functions on a single platform. The NFX150 is suited for small to medium-sized enterprises and can be used as a secure router
or Universal CPE (uCPE).
For more information on NFX150 Hardware, see the NFX150 Hardware Guide available at:
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/
Package Contents
The NFX150-C-S1 device is shipped with the following parts:
Four rubber feet to stabilize the chassis on a desk or other level surface
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Power supply adapter of 75W and an AC power cord with plugs appropriate for your geographical location
Register the Product
Register product serial numbers on the Juniper Networks website and update the installation base data if there is any addition
or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable for not
meeting the hardware replacement service-level agreement for products that do not have registered serial numbers or accurate
installation base data.
Register your product at
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
Update your installation base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
.
.

Advertisement

loading

Related Manuals for Juniper NFX150-C-S1

Summary of Contents for Juniper NFX150-C-S1

  • Page 1 Register product serial numbers on the Juniper Networks website and update the installation base data if there is any addition or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable for not meeting the hardware replacement service-level agreement for products that do not have registered serial numbers or accurate installation base data.

  • Page 2: Nfx150-C-S1 Front Panel And Rear Panel

    The wall mounting kits are not shipped with the device and must be ordered separately. To mount an NFX150-C-S1 device on a wall, you require the parts that are shipped with the device along with the following additional parts and equipment. These are not shipped with the device.
  • Page 3 To mount the device on a wall: Attach the wall-mount brackets to the sides of the chassis using the four wall-mount bracket screws on each side. Figure 3: Mounting the NFX150-C-S1 Device on a Wall Install four mounting screws on the wall.

  • Page 4: Connect Power To The Device

    NFX150-C-S1 Network Services Platform Quick Start Drill two holes at a distance of 11.95 in. (30.35 cm) on a plumb line from hole A and B, install the mounting screws. Insert the mounting screws only part way in, leaving about 1/4 in. (6 mm) distance between the head of the screw and the wall.

  • Page 5: Access The Device

    NFX150-C-S1 Network Services Platform Quick Start Table 2: Interface Mapping (continued) Port Label Interface Virtual Interface Security Zone DHCP State IP Address heth-0-4 ge-1/0/1 untrust Client ISP assigned heth-0-5 ge-1/0/2 untrust Client ISP assigned MGMT fxp0 192.168.1.1/24 Table 3: LTE Interfaces...

  • Page 6: Establish The Connection

    ISP. The device is assigned an IP address by the ISP through DHCP. Figure 4: Connecting the Interfaces on an NFX150-C-S1 Device Internet Optionally, you can obtain a SIM card from the ISP and connect the device through LTE. For more information about SIM card activation, see the Getting Started with NFX150 available at: https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/...

  • Page 7: Next Steps

    Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. and/or its affiliates in the United States and other countries. All other trademarks may be property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document.