Enterasys Matrix E1 1G694-13 Configuration Manual page 230

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
CLI Task
history buffer size
(show)
history buffer size
(set)
IGMP (set)
IGMP (show)
IGMP groups (show)
IGMP query count
(set)
IGMP query count
(show)
IGMP report delay
(set)
IGMP report delay
(show)
IP address (set)
A-4 Matrix E1 Series (1G694-13) Configuration Guide
Command Function and Syntax
Displays the size (in lines) of the command history buffer. For details,
refer to Section 9.2.2.5.
show history
Sets the size (in lines) of the command history buffer. For details,
refer to Section 9.2.2.6.
set history size
Enables or disables IGMP (Internet Group Management Protocol)
snooping on the device. For details, refer to
set igmp {enable | disable}
Displays IGMP status. For details, refer to
show igmp
Displays a list of IGMP streams and client connection ports. For
details, refer to Section
show igmp groups
Sets the IGMP query count time (in minutes). For details, refer to
Section 8.2.2.2.
set igmp query count size
Displays the IGMP query count time (in minutes). For details, refer to
Section 8.2.2.1.
show igmp query count
Sets the size (in number of queries) that must be missed before the
IGMP report delay timer is started. For details, refer to
Section 8.2.2.4.
set igmp report delay size
Shows IGMP report delay status. For details, refer to
show igmp report delay
Sets the local host IP address and subnet mask. For details, refer to
Section 3.2.2.11.
set ip address ip_addr [ip_mask]
Section
8.2.3.1.
Section 8.2.1.2.
8.2.1.1.
Section 8.2.2.3.