4.2.10.1 show trunk
Use this command to display trunking information for the device.
show trunk [trunk_name]
Syntax Description
trunk_name
Command Defaults
If trunk_name is not specified, information for all trunks will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display trunking information for the "blue" trunk:
Matrix>show trunk blue
trunk port: 7
trunk port: 8
(Optional) Specifies the name of the trunk port for which
information will be displayed.
Matrix E1 Series (1G694-13) Configuration Guide
Port Configuration
Setting Port Trunking
4-31