Enterasys Matrix E1 1G694-13 Configuration Manual page 239

CLI Task
trunk (set)
trunk (show)
trunk port (clear)
trunk port (set)
users (show)
version (show)
VLAN (clear)
VLAN (host, clear)
VLAN (host, set)
VLAN (host, show)
Command Function and Syntax
Creates, enables or disables trunks on the device. For details, refer to
Section 4.2.10.2.
set trunk trunk_name {create | disable | enable}
Displays trunking information for the device. For details, refer to
Section 4.2.10.1.
show trunk [trunk_name]
Removes a port from a trunk. For details, refer to
clear trunk port trunk_name priority_string
Adds one or more trunk ports to an existing trunk
Section 4.2.10.4.
set trunk port trunk_name port_string
Displays information about the active console port or Telnet
session(s) logged in to the device. For details, refer to
Section 9.2.2.10.
show users
Displays firmware and hardware information. For details, refer to
Section 3.2.2.4.
show version
Removes a statically created VLAN from the list of VLANs
recognized by the device. For details, refer to
clear vlan vlan_id
Resets the members of the host VLAN to the default VLAN. For
details, refer to Section
clear host vlan
Provides a secure VLAN where only designated users are allowed
access. For details, refer to
set host vlan vlan_id
Displays the existing host VLAN. For details, refer to
show host vlan
Matrix E1 Series (1G694-13) Configuration Guide
Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
6.2.5.3.
Section 6.2.5.2.
Section 4.2.10.5.
For details, refer to
.
Section 6.2.2.3.
Section 6.2.5.1.
A-13