Enterasys Matrix E1 1G694-13 Configuration Manual page 235

CLI Task
Spanning Tree hello (set)
Spanning Tree legacy
path cost (set)
Spanning Tree legacy
path cost (show)
Spanning Tree maximum
aging time (set)
Spanning Tree
point-to-point (set)
Spanning Tree
point-to-point (show)
Spanning Tree port cost
(set)
Spanning Tree port cost
(show)
Command Function and Syntax
Sets the Spanning Tree hello time, This is the time interval (in seconds)
the device will transmit BPDUs indicating it is active. For details, refer
to Section 5.2.1.6.
set spantree hello internal
Enables or disables legacy (802.1D) path cost values. For details,
refer to
Section 5.2.1.12.
set spantree legacypathcost {disable | enable}
Displays the administrative status of the legacy (802.1D) path cost
setting. For details, refer to
show spantree legacypathcost
Sets the Spanning Tree maximum aging time. This is the maximum
time (in seconds) the device can wait without receiving a
configuration message (bridge "hello") before attempting to
reconfigure. For details, refer to
set spantree maxage agingtime
Sets the administrative point-to-point status of the LAN segment
attached to a Spanning Tree port. For details, refer to
set spantree adminpoint port_string {true | false | auto}
Displays the administrative point-to-point status of the LAN segment
attached to a port. For details, refer to
show spantree adminpoint port_string
Assigns a cost value to a Spanning Tree port. This parameter is used to
determine the best path between Spanning Tree devices. For details,
refer to Section 5.2.2.6.
set spantree portcost port_string cost
Displays cost values assigned to one or more Spanning Tree ports. For
details, refer to Section
show spantree portcost port_string
Matrix E1 Series (1G694-13) Configuration Guide
Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
Section 5.2.1.11.
Section 5.2.1.7.
Section
5.2.2.5.
Section 5.2.2.10.
5.2.2.9.
A-9